Will pressure washing damage my block paving?

Not if done correctly. We use the right pressure for the surface type and work carefully around joints. We can also re-sand joints after cleaning if required.

Can you clean natural stone paving?

Yes, though natural stone such as Indian sandstone and slate requires lower pressure and specific cleaning products to avoid surface damage. We'll advise the best approach for your specific stone.

How long does a driveway take to dry?

Most driveways are dry enough to walk on within a couple of hours. Full drying for vehicle use typically takes 24 hours, depending on weather conditions.

Do you offer driveway sealing?

We can recommend and apply sealants to driveways and patios after cleaning to help protect them from future staining and reduce regrowth. Ask us about this when you book.

Pressure Washing North & North East Somerset

Pressure Washing

Transform patios, paths and exterior surfaces across North Somerset and Bath and North East Somerset. Our pressure washing removes algae, moss and grime for a cleaner, safer finish.

Request a Quote 01934 244461 WhatsApp

Professional Pressure Washing across North Somerset and Bath and North East Somerset

About this service

Professional Pressure Washing Across North Somerset & North East Somerset

Hard surfaces around your home accumulate years of biological growth, moss, oil staining and atmospheric grime that rainfall alone can't shift. Top Glass uses commercial-grade hot and cold pressure washing equipment to clean driveways, patios, block paving, paths, concrete, decking and exterior walls — bringing tired surfaces back to life and making them safer underfoot by removing slippery algae and moss.

What's included

Driveways, patios and paths all covered
Block paving, concrete and stone surfaces
Timber decking carefully restored
Stubborn oil and rust stains treated
Algae and moss fully removed
Surface algae and moss treated to reduce slippery buildup
Sand re-laying for block paving joints
Optional sealant application available

Patio and path cleaning starts with the surface

Pressure washing, also called jet washing, is a cleaning method rather than one treatment for every material. Concrete paths, natural stone patios and timber decking need different care. Loose pointing, surface coatings and weathered edges can change what is suitable. Send photographs and identify the material where possible; higher pressure is not automatically a better result.

Ask for a patio or path-cleaning quotation

A driveway needs its own finishing plan

If your main concern is a driveway, consider traffic marks, joints and whether re-sanding or sealing is appropriate as well as the wash itself. These decisions depend on the surface and its condition. Our driveway page explains that more specific service, while this page covers the wider range of suitable outdoor hard surfaces.

Explore driveway cleaning, re-sanding and optional sealing

Do not treat rendered walls like paving

A method suitable for a sound paved path may not be suitable for a rendered wall. For green growth or dark staining on render, request a separate assessment rather than asking for the wall to be jet washed. Cleaning also cannot repair loose render, cracked pointing or damaged paving.

Find out about low-pressure render cleaning

How it works

Your Pressure Washing in 4 simple steps

Surface assessment

We assess the surface type, staining level and any delicate areas before selecting the correct pressure and technique for the job.

Pre-treatment application

Stubborn biological growth and oil stains are pre-treated with appropriate cleaning solutions to help lift them before the main wash.

Pressure wash

We work methodically across the surface with commercial equipment, maintaining a consistent finish and avoiding damage to edges and pointing.

Rinse and review

A final rinse removes all loose material. We walk the surface with you to make sure you're happy before we leave.

Transparent pricing

What Affects the Price?

Every property is different. These are the main factors we consider when putting together your quote.

Surface area

We price by square metres. A small patio costs significantly less than a large driveway or full-perimeter path system.

Surface type

Block paving, natural stone, concrete, tarmac and timber decking each require different pressures and techniques, which affects the time and price.

Staining severity

Oil stains, rust marks or years of compacted moss require pre-treatment and extra passes, adding to the time and cost compared to lightly soiled surfaces.